Standard and custom-lenght steel sheets and plates
We offer an extensive range of hot rolled sheets and quarto plates and galvanized and cold rolled sheets directly from our stock. We can also deliver sheets and plates quickly cut to custom length. Our steel sheet range covers all common steel grades, and we stock approximately 230 different combinations of dimensions and grades.
We import most of our steel from Europe. We use the best-known steel manufacturers and pay particular attention to the sustainability and quality of our suppliers. We are the only retailer of sustainable Raex® wear-resistant steel in Finland.
Cold rolled coils and sheets
Cold rolled coils and sheets conforming to the material standard EN 10130 and the dimensional and form standard EN 10131. Oil protected grade DCO1 AmO.
| Thickness: | 0.75 – 3 mm |
| Width: | 1,000 mm, 1,250 mm, 1,500 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Hot-dip galvanized coils and sheets
Hot-dip galvanized coils and sheets conforming to the material standard EN 10346 and the dimensional and form standard EN 10143.
Grades DX51D+Z275, DX51D+Z100, S220GD+Z100 ja S220GD+Z350.
| Thickness: | 0.60 – 3 mm |
| Width: | 1,000 mm, 1,250 mm, 1,500 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Electro galvanized coils and sheets
Hot-dip galvanized coils and sheets conforming to the material standard EN 10152 and the dimensional and form standard EN 10131.
Grades DC01+ZE25/25 APC and DC01+ZV25/25APC (Jetskin®).
| Thickness: | 0.75 – 2 mm |
| Width: | 1,000 mm, 1,250 mm, 1,500 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Hot rolled coils and sheets, S235JR
Hot rolled coils and sheets conforming to the material standard EN 10025-2 and the dimensional and form standard EN 10051. CE-marked.
| Thickness: | 3 - 5 mm |
| Width: | 1,250 mm, 1,500 mm, 1,750 mm, 2,000 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Hot rolled coils and sheets, S235JR tear-drop
Hot rolled coils and sheets conforming to the material standard EN 10025-2 and the dimensional and form standard EN 10363. CE-marked.
| Thickness: | 3 – 8 mm |
| Width: | 1,500 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Hot rolled coils and sheets, S355K2+N
Hot rolled coils and sheets conforming to the material standard EN 10025-2 and the dimensional and form standard EN 10051. CE-marked.
| Thickness: | 3 – 8 mm |
| Width: | 2,000 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Hot rolled coils and sheets, S355MC
Hot rolled coils and sheets conforming to the material standard EN 10149-2 and the dimensional and form standard EN 10051. Cold formed, thermomechanically rolled.
| Thickness: | 3 – 20 mm |
| Width: | 1,500 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Hot rolled coils and sheets, S355MC pickled + oiled
Hot rolled coils and sheets conforming to the material standard EN 10149-2 and the dimensional and form standard EN 10051. Cold formed, thermomechanically rolled.
| Thickness: | 3 – 12 mm |
| Width: | 1,250 mm, 1,500 mm |
| Length: | We cut the coils to custom lengths according to your requirements. |
Hot rolled sheets, S650MC
Hot rolled sheets conforming to the material standard EN 10149-2 and the dimensional and form standard EN 10051. Cold formed, thermomechanically rolled.
| Thickness: | 3 – 12 mm |
| Width: | 1,300 mm, 1,500 mm |
| Length: | 3,000 mm, 6,000 mm |
Hot rolled sheets, S650MC pickled + oiled
Hot rolled sheets conforming to the material standard EN 10149-2 and the dimensional and form standard EN 10051.
Cold formed, thermomechanically rolled.
| Thickness: | 3 – 6 mm |
| Width: | 1,250 mm, 1,500 mm |
| Length: | 3,000 mm |
Hot rolled quarto plates, S355K2+N
Hot rolled quarto sheets conforming to the material standard EN 10025-2 and the dimensional and form standard EN 10029. CE-marked.
| Thickness: | 8 – 200 mm |
| Width: | 1,500 mm, 2,000 mm, 2,450 mm, 2,500 mm |
| Length: | 3,000 - 12,000 mm |
Hot rolled quarto plates, S690QL primed
High strength quenched and tempered hot rolled quarto sheets conforming to the material standard EN 10025-6 and the dimensional and form standard EN 10029. CE-marked.
| Thickness: | 15 – 30 mm |
| Width: | 2,500 mm |
| Length: | 6,000 mm |
RAEX® WEAR-RESISTANT STEEL
Hot rolled wear-resistant sheets, Raex®400
Wear-resistant sheet HB400. Dimensional and form standard EN 10051.
| Thickness: | 3 – 8 mm |
| Width: | 1,500 mm |
| Length: | 3,000 mm, 6,000 mm |
Hot rolled wear-resistant quarto plates, Raex®400
Wear-resistant sheet HB400. Dimensional and form standard EN 10029.
| Thickness: | 5 – 60 mm |
| Width: | 1,500 mm, 2,500 mm |
| Length: | 2,500 mm, 6,000 mm |
Hot rolled wear-resistant quarto plates, Raex®500
Wear-resistant sheet HB500. Dimensional and form standard EN 10029.
| Thickness: | 10 – 40 mm |
| Width: | 2,000 mm, 2,500 mm |
| Length: | 4,000 mm, 6,000 mm |